To Next PageTo Next PageWhy is my Euro-Pro Shark Retractor EP187 not picking up?
If your Euro-Pro Vacuum Cleaner isn't picking up dirt or the suction is weak, first, empty the dust cup. If that doesn't solve it, turn off and unplug the unit to check for clogs in the air duct. Also, the HEPA dust cup filter may need cleaning or replacing. Finally, examine the hose for any obstructions.
How to fix a Euro-Pro Shark Retractor EP187 that won't turn on?
If your Euro-Pro Vacuum Cleaner isn't operating, make sure the power cord is firmly plugged into the outlet. Check the fuse or breaker and replace or reset if necessary. If the thermostat has tripped, turn off the unit, unplug it, allow it to cool down, and then restart it.
What to do if dust is escaping from my Euro-Pro Shark Retractor EP187 Vacuum Cleaner?
If dust is escaping from your Euro-Pro Vacuum Cleaner, the dust cup might be full; try emptying it. Also, check if the HEPA Dust Cup Filter is installed correctly according to the instructions. If there's a puncture or hole in the filter, replace it.
Why is the turbo brush on my Euro-Pro Vacuum Cleaner not rotating?
If the turbo brush on your Euro-Pro Vacuum Cleaner isn't rotating or is rotating slowly, check for obstructions in the rotating brush or elbow and clear them. Also check the hose for obstructions and clear them. The HEPA dust cup filter might be clogged, so clean it.
What to do if the hose or brushes on my Euro-Pro Vacuum Cleaner won't pick up?
If the hose or brushes on your Euro-Pro Vacuum Cleaner aren't picking up, start by removing the hose and/or brushes to check for any clogs. Also, make sure to empty and clean the dust cup.
General| Brand | Euro-Pro |
|---|---|
| Model | Shark Retractor EP187 |
| Category | Vacuum Cleaner |
| Language | English |
Steps for using the hand vacuum and its basic functions.
Instructions for attaching and using the air-driven turbo brush with hose assembly.
Procedure for cleaning the turbine wheel of the air driven turbo brush.
