E-Drive sur CF80 en Anglais UCF-000R001-GB F.M:08/14 p: 22/41
This function allows to reduce the power consumption during periods of non-use of the oven.
2 configurations of energy saving are available in function of the regulator setting :
the setting between 50°C and 150°C corresponds to the soaking at low temperature.
Temperature setting at «000», corresponds to the configuration : oven stop
In the «Energy saving» mode, the temperature displayed (real or setpoint) is the same than typically used (Look at the paragraph «User menu» - Programming instructions).
There are 2 different ways to engage the Energy saving function :
Manual mode
ENERGY SAVING
Press
simultaneously the
keys
(OUT OF BAKING)
The «Energy saving» function is
activated.
The oven remains energized and the
regulator maintains the requested
temperature (here : 80°C)
Factory setting : 000
If 1mn later the temperature is still at
«000», the control board lights off.
Setting range : 50 to 150°C
(Look at the paragraph «User menu»
- Programming instructions)
To stop the «Energy saving» mode, press the key .
Activation
To Next Page
Loading...
