12
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
Operating Instructions (Cont.)
Extra Features
Temperature memory
The heater has a memory function, which will remember the set temperature
in case of a power failure. When the power is back on, it will continue
operating to the set temperature. (Timer settings are NOT memorised and will
need to be reset.)
Safety features
• The heater has a tip-over safety switch, which will turn off the heater if
it is knocked over or if it is not in the upright position. It will start working
again as soon as the unit is placed upright.
• The unit is equipped with an overheat protection mechanism which
shuts off the heater automatically in case of overheating. The heater will
automatically turn back on when the internal temperature has dropped to
a safe level. Should the overheat protection be triggered, switch off the
heater at the POWER switch [ I / O ], then unplug it. Let the unit cool for
5–10 minutes, then plug it in again and operate as normal.
IMPORTANT!
• The most common cause of overheating is deposits of dust or fluff
in the appliance. Ensure these deposits are removed regularly by
unplugging the appliance and vacuum cleaning air vents and grilles.
• Also make sure that the appliance can sufficiently dissipate the heat
generated. This is particularly important in case the overheat protection
has been triggered. Ensure there is sufficient room all around the heater,
and nothing is covering or obstructing the air outlet or intake.
To Next Page
Loading...
