8
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
Unpacking
• Carton: This product has been packaged to protect it against transportation
damage. Unpack the appliance and keep the original packaging carton
and materials in a safe place. It will help prevent any damage if the product
needs to be transported in the future, and you can use it to store the
appliance when it is not in use. In the event the carton is to be disposed of,
please recycle all packaging materials where possible.
• Plastic wrapping can be a suffocation hazard for babies and young
children, so ensure all packaging materials are out of their reach and
disposed of safely.
• Cord: Inspect the power supply cord and plug, and all other parts of the
appliance, for visual damage. Do not use the appliance if anything appears
to be damaged or not working properly. In case of damage, contact our
after sales support centre using the details at the bottom of the page.
• Documentation: Make sure you have read and understood all instructions
and warnings in this manual. Refer to the Product Overview, on pages 6–7,
to familiarise yourself with the product and identify all parts. Pay particular
attention to the safety instructions on the previous pages.
• Assembly: Your new Convection Panel Heater can be used freestanding,
with the supplied stands, or mounted on an appropriate wall using the wall-
mounting kit supplied. Please choose a convenient, low position for wall-
mounting where you can easily access the controls on top of the heater.
Assembly instructions for both options are provided on the following
pages.
Getting Started
To Next Page
Loading...
