EasyManua.ls Logo

Euromatic JCPH-2000 - Technical Specifications and Compliance; Responsible Disposal

Euromatic JCPH-2000
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
Other Useful Information (Cont.)
Responsible Disposal
At the end of its working life, do not throw this appliance out with your
household rubbish. Electrical and electronic products contain substances
that can have a detrimental effect on the environment and human health
if disposed of inappropriately. Observe any local regulations regarding the
disposal of electrical consumer goods and dispose of it appropriately for
recycling. Contact your local authorities for advice on recycling facilities in
your area.
Compliance
This appliance has been fully tested and meets all requirements as set out by
standards AS/NZS 60335.1 and AS/NZS 60335.2.30.
CAUTION!
Do not attempt to open the heater and repair it yourself. Any repairs must
be carried out by a qualified technician.
Servicing
If your heater requires servicing, please contact our after sales support
centre using the details at the bottom of the page.
If the power cord is damaged and needs replacing, it must be replaced by
a service agent or equivalent qualified person in order to prevent a hazard.
Technical Specifications
Model No JCPH-2000
Rated Power 1700 – 2000W
Rated Voltage 220-240V ~ 50-60Hz
Ingress Protection IP24 -- protected against ingress of solid
objects up to 12mm (e.g., fingers), and
against water sprays from all directions
Dimensions (with stand)
485 (H) x 1025 (W) x 240 (D) mm
Weight
7.1kg

Related product manuals