18
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
Timer
The air conditioner has a 24 hour timer, which you can set to start the unit at
a later time, or to switch off the unit automatically.
• In stand-by mode, press the TIMER button [
] to activate the auto start
program, and then use the UP(+) or DOWN(-) buttons to adjust the time
setting. The timer indicator turns on.
• In power-on mode, press the TIMER button [
] to activate the auto stop
program, and then use the UP(+) or DOWN(-) buttons to adjust the time
setting. The timer indicator turns on.
• To deactivate the timer function, press the TIMER button until the timer
indicator turns off.
Auto restart
If there is a power failure while the air conditioner is running, the unit will
resume operation with the same settings (except for timer, sleep and swing)
as before the power failure. The timer, sleep and swing features will be
deactivated.
Please refer to pages 19–20 for button a description of the modes and
functions.
Instructions (Cont.)