9
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
Operating Instructions
Connection
• Place the heater on a firm, flat, stable, dry and heat-resistant surface.
Always choose a safe location, keeping in mind the safety precautions on
the previous pages.
• With the heat settings knob set to the OFF [ 0 ] position, plug the heater
into a power outlet with a 10A current-carrying capacity and switch on
power to the outlet.
• Always use a separate socket that has no other appliances connected at
the same – do not plug it into a power board or socket adaptor; do not
use an extension cord. Also ensure that the socket is easily accessible so
that the cord can readily be disconnected in an emergency.
Heat settings
This heater can be operated on three settings. Turn the heat settings knob
clockwise to choose the desired heat setting.
[ 1 ] On this setting, one heating element is working
for a low (800W) heat output.
[ 2 ] On this setting, two heating elements are
working for a medium (1600W) heat output.
[ 3 ] On this setting, all three heating elements are
working for a high (2400W) heat output.
We recommend you choose the highest setting [ 3 ]
to warm up the room quickly. Please ensure that you
have no other appliances operating on the same power outlet at the same
time.
When the room is comfortably warm, rotate the knob anticlockwise (turn to
the left) and select a lower setting to maintain the room temperature.
NOTE: For the best heating effect, do not keep windows or doors wide open
when the heater is in use.
Switching off
Turn the heat settings knob anticlockwise to the [ 0 ] setting to switch off
the heater. Always unplug the heater from the power supply when you have
finished with it.
To Next Page
Loading...