Need help?Do you have a question about the EUTECH INSTRUMENTS CYBERSCAN PH500 PHORP BENCH METER and is the answer not in the manual?
General| pH Resolution | 0.01 pH |
|---|---|
| pH Accuracy | ±0.01 pH |
| ORP/mV Resolution | 1 mV |
| ORP/mV Accuracy | ±1 mV |
| Temperature Resolution | 0.1 °C |
| Calibration Points | Up to 5 points |
| Outputs | RS232 |
| Temperature Accuracy | ±0.5 °C |
| Temperature Compensation | Automatic (0 to 100 °C) |
| Display | LCD with backlight |
| ORP/mV Range | ±2000.0 mV |
Introduces the CyberScan pH meter series.
Provides general details on the pH meter and its components.
Details the personalized LCD screen and its data fields.
Explains the keyboard layout and button functions.
Details the rear panel connectors for accessories.
Outlines the steps for preparing the CyberScan for measurement.
Covers pre-calibration steps including buffer solutions and powering on.
Details the calibration procedures for pH and temperature measurements.
Explains how to take measurements and use the HOLD function.
Provides instructions for electrode care, storage, and electrolyte replacement.
Describes methods for cleaning the electrode for optimal performance.
Explains procedures for reactivating a slow-responding electrode.
Lists error messages, their causes, and recommended solutions.
Provides solutions for common operational problems encountered with the device.
Explains the fundamental principles of pH measurement.
Guides on the proper use of standard pH buffer solutions for calibration.
Presents a table of pH buffer values across various temperatures.
Lists available accessories, including buffers and electrodes.
Details the technical specifications of the CyberScan pH 500 unit.
Outlines the warranty terms and the article return policy.
To Next Page
