Evak DPC-10 - Advanced Setting - Water Shortage; Advanced Setting - Auto Restart;Shutdown

16
2).Detection time setting of water shortage (Show code P-Dry & sec)
3).Pressure of water shortage setting (Show code P-Dry)
5). Auto shutdown setting after continuous running
(Show code Auto)
Press
to adjust the value upward
Press
to adjust the value downward
↓ Press once
4).Time setting of automatic re-start running after warning shutdown
(Dry running or Over pressure) (α value) (Show code Auto reset)
Press
to adjust the value upward
Press
to adjust the value downward
↓ Press once
Press
to adjust the value upward
Press
to adjust the value downward
↓ Press once
»
St-0: Pressure controller keeps running and won’t shut down
automatically.
St-.5&St-1~5: Pressure controller will auto shut down after
continuously running 0.5 or 1~5 hours and won’t auto restart
after the shutdown.
»
Press
to adjust the value upward
Press
to adjust the value downward
↓ Press once