EVCO S.p.A. EVXV 800 range | Installer manual ver. 1.2 | Code 144XV800E124
page 6 of 66
Via a serial interface (to be ordered separately), it is also possible to connect the controller to the Parameters Manager
set-up software system, to the monitoring and surveillance system of the RICS plants or to the data recording device,
to download the recorded data (via USB), to upload and download EVUSBREC01 configuration parameters.
The following are indicated among the many other features:
- direct loads connection (except the utility managed by the fifth digital output)
- two-level management of the overheated condenser alarm
- memorisation of the defrosting interval
- management of temperature alarms
- compressor operating hours count
- "keyboard lock" function.
To Next Page
Loading...
Need help?
General
