Evco EVXV 800 Series User Manual

EVCO S.p.A. EVXV 800 range | Installer manual ver. 1.2 | Code 144XV800E124
page 8 of 66
defrosting/evaporator fan 8 A 8 A
evaporator fan 8 A 8 A
door resistances/condenser fan 8 A 8 A
cabinet light/needle probe heating/UV light 8 A 8 A
Communication port EVXV802 EVXV812 EVXV805 EVXV815
serial port with MODBUS communication
protocol
• • • •
Other features EVXV802 EVXV812 EVXV805 EVXV815
clock • •
signal buzzer and alarm • • • •
direct loads connection • •
except for the
utility
managed by
the digital
output
except for the
utility
managed by
the digital
output
management of blast chilling and
storage/deep freezing and storage cycles
• • • •
management of temperature/time controlled
operation cycles
• • • •
hard/soft operating cycles management • • • •
management of the test regarding correct
insertion of the needle probe
• • • •
management of the overheated condenser
alarm
• • • •
memorisation of the defrosting interval • • • •
management of temperature alarms • • • •
compressor operating hours count • • • •

Evco EVXV 800 Series Specifications

General

Brand	Evco
Model	EVXV 800 Series
Category	Controller
Language	English