4 5
Get Started Installation - Preparation
In your fuse box, switch off the fuse connected to your light switch. Switch the light
switch on and off a few times to make sure that there is no current flowing.
Only authorized electricians may connect, install and set up Eve Light Switch.
Before installation, ensure the system is disconnected from the power supply!
Eve Light Switch is used to directly switch permanently connected electrical loads
with a supply voltage of 230 V~. In particular, these include lighting and ventilation
and exclude electric heaters, power outlets and machines of any kind.
Eve Light Switch is designed for use in household and similar fixed installations.
Before installation, ensure suitability by reviewing the technical data and the
operating conditions.
Eve Light Switch must not be used in conjunction with life-support systems or
other devices that could put the life or health of humans and animals at risk or risk
property damage.
CAUTION - Risk of electric shock!
To Next Page
Loading...
Need help?
General