quest_manual_final_single.indd 16 09/06/2017 19:55
16
Step 6 Install Stem and Handlebars
Ideally with the help of another person, turn the bike first onto its side, then onto its wheels.
Step 5 Flip Trike Onto Its Wheels
1. Slide the stem into the steerer tube.
Make sure that it is in at least as far
as the
"Minimum Insertion" line etched into
the side of the stem. Turn the stem/
handlebar assembly so that it aligns
properly with the front wheel, and
tighten the bolt in the stem from the
top:
2. Adjust the angle of the handlebars
so that they are comfortably reached
from the seat. Loosen the bolt shown
to adjust, then securely tighten:
To Next Page
Loading...
