18
Many parts of your new EVELO Electric Bicycle can be customized for a personalized t.
Seat Adjustment
The seat is easily adjusted up or down by ipping the quick-release lever that clamps
the post into the bike. Note that there is a “minimum insertion line” stamped on the
seat post that must be adhered to for safety’
s sake. (If you need your seat to be higher
than permitted with the stock seat post, please contact us.)
The seat can also be moved forward and backward by loosening the single bolt on the
underside of the seat. Since it slides on its rails, there is no need to remove the bolt —
just loosen it, adjust, and rmly re-tighten.
Loosening this bolt also lets you change the angle of the seat up or down a bit. Again,
be sure to re-tighten it firmly if you loosen it to change the seat position in any way.
Handlebar Adjustment
To adjust the handlebars to a customized position:
Loosen the bolt shown, tilt the
handlebars to the preferred position,
and retighten. You may need to
adjust the display angle and brake
levers also.
The tires have a range of recommended inflation indicated on the sidewall of the
tire. (35-65 psi) Lower pressure will give a softer ride. A higher pressure will provide
a firmer ride, but will give the best range per charge.
FIT ADJUSTMENTS
quest_manual_final_single.indd 15 09/06/2017 19:55
Tire Inflation
To Next Page
Loading...
