7
Replacing the Lamp
· This fireplace consists 3 bulbs that illuminate flame effect. Light bulbs need to be replaced if
you notice a dark section of the flame or when the flames lose clarity.
· Warning-Always disconnect from the power port before removing bulbs, to reduce the risk of
fire, electric shock or damage to property.
· Warning-The bulbs reach high temperatures during operation. Allow the bulbs to cool down
before replacing them.
· Note: Two people are required for this process.
· It is recommended that the fireplace is carefully removed from the wall and laid on its back in
order to replace the lamp.
· Gently slide the front glass panel towards the top of the fireplace and remove it. Store the glass
safely out of the way, while the bulb is replaced so that it does not get damaged.
· At the bottom of the fireplace, there is a lamp cover fixed with seven Philip's head screws-see
Fig.5, remove the seven screws and lift the lamp cover.
· Carefully slide the flexible rotisserie to one side ensuring that the rubber grommet is not
lost-see Fig.6.
To Next Page
Loading...