114
Care and Cleaning
• DO NOT lubricate or immerse in water the LATCH/UAS connectors, the buckle,
or any other part of this child restraint, unless rinsing is permitted, as stated on
the back of the buckle for your restraint.
• Plastic and metal parts may be wiped clean with
mild soap and water and dried with a soft cloth.
Do not use abrasive cleaners or solvents.
• Take care not to damage any labels.
• The harness can be wiped clean with mild soap
and water. Allow harness to air dry.
• Machine wash soft goods separately in cold
water, delicate cycle, NO CHLORINE BLEACH. Tumble dry 10 - 15 minutes on
low heat. Remove immediately.
Soft goods include headrest pad, seat pad, head pillow, body pillow, harness
covers, and buckle cover.* Remove the foam inserts from the headrest pad prior
to washing.
• NEVER use child restraint without the seat pad.
• To protect the child restraint from damage caused by weather, rodents, and other
elements common to garages, the outdoors, and other storage locations, remove
the seat pad and thoroughly clean the restraint and pad prior to storage. Take
care to clean in the areas where crumbs and other debris tend to accumulate.
* Not all features are available on all models. Styles may vary.
TIP!
To help protect the
vehicle upholstery, place a
towel beneath and behind
the child restraint.
To Next Page
Loading...
Need help?
General
