49
Child Restraint Features
Tether Strap
A Tether reduces child restraint
movement in a crash and helps to
achieve a tight installation. ALWAYS
USE A TETHER STRAP FOR
HARNESS INSTALLATION.
Tether anchor locations vary from
vehicle to vehicle and some typical
locations are shown here. Refer to
your vehicle Owner's Manual for exact
locations, anchor identication , and
requirements
Refer to the appropriate vehicle
installation method for Tether
installation and storage instructions.
REAR-FACING
LEVEL INDICATOR
Bead must be located
within appropriate zone.
Vehicle MUST be on level ground.
Lower Connectors/UAS
Do not install
by this method
for a child
weighing more
than 15.9 kg
(35 lbs).
Lap/Shoulder Belt
Lap Belt
Always use tether strap
in rear facing installation.
P25809042 7/20
To Next Page
Loading...
