53
Installing and Removing the Child Restraint from the Base
Installing the Child Restraint to the Base
To install the Child Restraint to the
Base:
1. Lift the legrest ap and locate the
arrow on the underside of the seat
pad.
Remove Seat From Base Install Seat Onto Base
Pull handle to
rotate seat
Align arrows
Lift to remove
Insert seat
onto base
Align arrows
Tire de la
palanca para
girar el asiento
Alinee las
flechas
Levante para
quitar
Alinee las
flechas
Inserte el
asiento en
la base
Quitar el asiento de la base Instale el asiento en la base
25809098 10/20
Parentlink: 1-800-233-2229
Scan for instructional videos.
Escanear para videos instruccionales.
evenflo.com/RevolveHowTo
2. Align the arrow on the seatpad
with the arrow on the Base.
3. Install the seat shell to the Base.
4. Rotate the seat to ensure it is
properly installed.
To Next Page
Loading...
