59
Lap/Shoulder Belt (Rear-Facing and Forward-Facing)
Installing Lap/Shoulder Belt (Preferred Method)
NEVER place vehicle belt over
LockStrong™, even in a vehicle
with longer buckle stalks. This will
prevent proper operation of the
Child Restraint.
Some vehicle lap/shoulder belts
have a plastic button or extra fold
of webbing on the belt. Do not
allow these to interfere with belt
routing through LockStrong™. If
they interfere:
a. Shift the Base slightly to the
left or right to eliminate the
interference.
b. Use LATCH if within the
weight limit, or
c. Move the child restraint to a
different location.
To Next Page
