61
Lap/Shoulder Belt (Rear-Facing and Forward-Facing)
Installing Lap/Shoulder Belt (Preferred Method)
NEVER install this Child Restraint
using a non-locking vehicle lap/
shoulder belt.
NOTE: Refer to your vehicle
Owner’s Manual for information.
11. Pull the Tether Adjuster Strap to
tighten.
12. Install Seat Shell to Base (pg. 53),
move seat shell to the appropriate
REAR-FACING or FORWARD-
FACING position based on the
child’s size (see pgs. 10 and 12),
and lock into position. Conrm that
the seat is in a locked position by
checking indicator.
To Next Page
