93
Booster Mode (Forward-Facing Only)
Installing the Booster
8. Apply pressure to fully close the
LockStrong™. The lock indicator
will turn GREEN when fully closed.
NOTE: If belt tensioner does not
fully close (lock indicator still RED),
open the LockStrong™ and try
loosening the LATCH/UAS strap
slightly.
6. Push Base against vehicle seat
back. Tension LATCH/UAS Strap
by pulling on loop until snug,
making sure not to overtighten.
7. After tightening LATCH/UAS,
secure excess strap under the
LockStrong™.
To Next Page
Loading...
