43
Thread the seat
belt through the base
(or child restraint) and
buckle the seat belt.
Using the Locking Clip
1
Remove locking clip from vehicle seat belt when
not used with a child restraint, or the vehicle seat
belt will not properly restrain an adult or child.
Serious injury could occur.
To watch a video about installing a locking clip, go to
www.evenflo.com.
Locking Clip
installed properly.
If your vehicle is model year 1996 or newer, it likely
has a vehicle belt system that can be locked when
tightened, and will not require use of a Locking Clip.
Consult your vehicle owner’s manual before
installing a Locking Clip.
Install Locking Clip,
if necessary.
If your vehicle was
built prior to model
year 1996, and has
a lap/shoulder belt
that is equipped with
an emergency locking
retractor (ELR) AND sliding
latch plate, you MUST use
a Locking Clip. Check your
vehicle owner’s manual to
identify which vehicle belt
system is in your vehicle.
13 mm
(0.5 in.)
WARNING!
DEATH or SERIOUS
INJURY can occur.
To Next Page
Loading...
