61
Lap/Shoulder Belt (Rear-Facing and Forward-Facing)
Installing Lap/Shoulder Belt (Preferred Method)
NEVER install this Car Seat using
a non-locking vehicle lap/shoulder
belt.
NOTE: Refer to your vehicle
Owner’s Manual for information.
11. Pull the Tether Adjuster Strap to
tighten.
12. Install Seat Shell to Base (pg.
53), move Seat Shell to the
appropriate REAR-FACING or
FORWARD-FACING position
based on the child’s size (see pgs.
10 and 12), and lock into position.
13. Conrm that the seat is in a
locked position by checking that
the Rotation Lock Indicator is
GREEN.
To Next Page
Loading...
