Evenflo REVOLVE360 User Manual

66
Lap Belt Only (Rear-Facing and Forward-Facing)
Installing Lap Belt
3. Remove Tether from Tether Storage
Location under the Base and place
the Base in an approved rear
vehicle seating location. Make sure
the Base lies at on the vehicle seat
and rmly up against the seat back.
4. Locate the Tether Anchor in your
vehicle and loosely attach the Tether
Hook to the Tether Anchor.

Evenflo REVOLVE360 Specifications

General

Type	Convertible Car Seat
Rotation	360-degree rotation
Rear-Facing Weight Capacity	4-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Harness	5-point harness
Headrest Positions	10
Safety Standards	FMVSS 213
Side Impact Protection	Yes
Machine Washable Cover	Yes
Installation	LATCH or seat belt