Evenflo REVOLVE360 User Manual

67
Lap Belt Only (Rear-Facing and Forward-Facing)
Installing Lap Belt
5. Squeeze handle on LockStrong
belt tensioner until lock indicator
turns RED, then lift up on belt
tensioner to allow access to the
belt path.
6. Route lap belt through belt path
opening on window side of base
and feed through opposite belt
path opening. Push Base against
vehicle seat back. BUCKLE THE
BELT.

Evenflo REVOLVE360 Specifications

General

Type	Convertible Car Seat
Rotation	360-degree rotation
Rear-Facing Weight Capacity	4-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Harness	5-point harness
Headrest Positions	10
Safety Standards	FMVSS 213
Side Impact Protection	Yes
Machine Washable Cover	Yes
Installation	LATCH or seat belt