Evenflo REVOLVE360 User Manual

77
LATCH/UAS (Rear-Facing and Forward-Facing)
Installing LATCH/UAS
4. Remove Tether from Tether
Storage Location under the
Base and place the Base in an
approved rear vehicle seating
location. Make sure the Base lies
at on the vehicle seat and rmly
up against the seat back.
5. Locate the Tether Anchor in your
vehicle and loosely attach the
Tether Hook to the Tether Anchor.

Evenflo REVOLVE360 Specifications

General

Type	Convertible Car Seat
Rotation	360-degree rotation
Rear-Facing Weight Capacity	4-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Harness	5-point harness
Headrest Positions	10
Safety Standards	FMVSS 213
Side Impact Protection	Yes
Machine Washable Cover	Yes
Installation	LATCH or seat belt