Evenflo REVOLVE360 User Manual

79
LATCH/UAS (Rear-Facing and Forward-Facing)
Installing LATCH/UAS
8. Push Base against vehicle seat
back. Tension LATCH/UAS Strap by
pulling on loop until snug, making
sure not to overtighten.
10. Apply pressure to fully close the
LockStrong. The lock indicator will
turn GREEN when fully closed.
NOTE: If belt tensioner does not fully
close (lock indicator still RED), open
the LockStrong and try loosening the
LATCH/UAS strap slightly.
2
Tighten Aprete
1
4
Instalación con conectores inferiores
Lower Connector Installation
Open Abre
Close Cierre
Attach
Acople
25809061 10/20
3
Vehicle Belt Installation
Instalación con cinturón del vehículo
Open Abre
Route Ruta
Close and lock
3
Or O
4
2
1
Tighten lap belt Cinturón para regazo
Tighten lap/ shoulder belt Apreta cinturón para regazo y hombro
25809059 10/20
Cierre y bloquear
9. After tightening LATCH/UAS, secure
excess strap under the LockStrong.

Evenflo REVOLVE360 Specifications

General

Type	Convertible Car Seat
Rotation	360-degree rotation
Rear-Facing Weight Capacity	4-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Harness	5-point harness
Headrest Positions	10
Safety Standards	FMVSS 213
Side Impact Protection	Yes
Machine Washable Cover	Yes
Installation	LATCH or seat belt