Evenflo REVOLVE360 User Manual

91
Booster Mode (Forward-Facing Only)
Installing the Booster
3. Remove LATCH/UAS anchors
from storage locations on back
side of base as shown on pg. 51.
2. Before placing car seat in vehicle,
remove Seat Shell from Base (see
pg. 54), then place the Base in
an approved rear vehicle seating
location and make sure it lies at
on the vehicle seat.

Evenflo REVOLVE360 Specifications

General

Type	Convertible Car Seat
Rotation	360-degree rotation
Rear-Facing Weight Capacity	4-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Harness	5-point harness
Headrest Positions	10
Safety Standards	FMVSS 213
Side Impact Protection	Yes
Machine Washable Cover	Yes
Installation	LATCH or seat belt