Evenflo Spectrum User Manual

20 21
C A
1. Thread the looped end of the shoulder belt clip belt
A
through the anchor point on back of the base
B
.
2. Thread the shoulder belt clip
C
through the loop at
the end of the belt
A
and pull until tight.
Note: Use the Shoulder Belt Clip only when necessary to
position the belt so it lays across the child’s chest midway
between his/her shoulder and neck.
3. Place booster
B
on the vehicle seat and attach the
shoulder belt clip
C
to the vehicle shoulder belt
D
.
4. Pull the adjustment strap
E
until belt clip
C
is even
with the child’s shoulder and the vehicle shoulder
belt
D
lays across the child’s chest midway between
his/her shoulder and neck.
WARNING
Cup Holder
To use Cup Holders, slide them out from the base.
Using the Cup HoldersUsing the Shoulder Belt Clip
C
D
E
C
A
B
• DO NOT use the cup holder to store cans, bottles, or
hard containers. Only for use with soft cups (such as
styrofoam or paper).
• DO NOT place any cups that contain hot liquids in the
cup holder.
• DO NOT attach additional padding, toys, or other
devices to the booster seat. Items not tested with the
booster seat could injure the child.

Evenflo Spectrum Specifications

General

Brand	Evenflo
Model	Spectrum
Category	Car Seat
Language	English