22 23
Removing the Seat Pad
1. Remove the seat pad
from the backrest
assembly. Disconnect
elastic seat pad straps
D
from the hooks on
the backrest assembly.
Remove the seat pad.
2. Remove the seat
pad from the base.
Disconnect elastic seat
pad straps
E
from the
hooks on the bottom
of the base. Disconnect
retainer clips
F
from
the front of the base.
Remove the seat pad.
E F
D
Care and Cleaning
• Plastic parts may be wiped clean with mild soap and
water and dried with a soft cloth. Do not use abrasive
cleaners or solvents.
• Take care not to damage any labels.
•
The seat pad (except for leather seat pads—not available
on all models) can be machine washed separately in cold
water, delicate cycle, tumble dry 10 – 15 minutes on low
heat.
• Never use booster seat without the seat pad.
• To help protect the vehicle upholstery, place a towel
beneath and behind the booster seat.
Proper Disposal of this Child Restraint
At the end of this child restraint’s useful life, Evenflo
encourages you to dispose of it properly. Most of the
components in this child restraint are recyclable.
1. Remove all fabric and padding.
2. Remove all screws and disassemble the restraint.
3. Recycle all plastic/foam parts and discard the rest.
If your local recycling center won’t accept the padding,
you may dispose of it in the landfill.
Note: Evenflo uses recycled materials in the manufacturing
process whenever possible but never for components that
are critical for safety.
To Next Page
Loading...
Need help?
General