mains power
MAINS SWITCH
Use the Mains Switch to turn the 2030
on or off.
MAINS INPUT
Connect the mains supply here. Ensure
that you use only the cable supplied or
a genuine Event replacement. Note that
the amplifier is not entirely disconnected
from mains power unless this cable is
completely disconnected.
MAINS VOLTAGE SELECTOR
Please note, that as the 2030 is not fi xed
to operate in the voltage range of the
region that it is sold in, extra care must
be taken before connecting the mains
power.
Please ensure that the voltage selector
is set to the correct voltage for your
region, and that the correct fuse
is installed. Damage caused by an
incorrect voltage setting will not be
covered under warranty.
709-950-1-1_2030_usermanual.indd 9709-950-1-1_2030_usermanual.indd 9 12/03/2012 12:05:44 PM12/03/2012 12:05:44 PM
To Next Page
Loading...
