Need help?Do you have a question about the Event 2030 and is the answer not in the manual?
General| Power handling program | 300 W |
|---|---|
| Color | Black |
| Nominal impedance | 8 Ω |
| Components | 12" |
| Input connectors | 2 x Neutrik NL4 |
| Finish | Black |
| Driver Size | 12" |
The 2030 requires the input of an industry standard XLR style cannon jack.
Allows for modification of the input sensitivity, from -12dB to +12dB.
Allows for the implementation of a shelving filter at 2kHz. Boost and cut is variable between +/- 3dB.
Allows for the implementation of a shelving filter at 200Hz. Boost and cut is variable between +/- 3dB.
Use the Mains Switch to turn the 2030 on or off.
Connect the mains supply here. Use only the cable supplied or a genuine Event replacement.
Ensure the voltage selector is set to the correct voltage for your region and the correct fuse is installed.
Details on the system type, frequency response, crossover, filters, and acoustic output levels.
Specifications for the low frequency driver, including piston diameter, voice coil, former material, magnet, and cone.
Specifications for the mid range driver, including piston diameter, voice coil, former material, magnet, and cone.
Specifications for the high frequency driver, including piston diameter, voice coil, magnet, and cone type.
Technical details of the low frequency amplifier, including frequency response, THD, power, and cooling.
Technical details of the high frequency amplifier, including frequency response, THD, power, and cooling.
Details on cabinet construction, volume, dimensions, weight, and operating temperature range.
Specifications for the power supply, including type, rating, and AC mains fuse/voltage selector.
To Next Page
