Do you have a question about the Eventide Eclipse and is the answer not in the manual?
Type | Multi-effects Processor |
---|---|
A/D/A Conversion | 24-bit |
Sampling Rate | 44.1 kHz, 48 kHz |
Digital Inputs | AES/EBU, S/PDIF |
Digital Outputs | AES/EBU, S/PDIF |
MIDI I/O | In, Out, Thru |
Display | LCD |
Frequency Response | 20 Hz - 20 kHz |
DSP | Motorola 56362 |
Effects | Reverb, Delay, Pitch Shift, Modulation |
Analog Inputs | 2 x XLR |
Analog Outputs | 2 x XLR |
Dimensions | 19" |
Power Supply | 100-240 VAC, 50/60 Hz |
Explains the conceptual structure of the Eclipse unit.
Details the physical controls and indicators on the Eclipse's front panel.
Describes the various physical audio and data connections on the rear.
Guides on connecting the Eclipse to external audio and digital gear.
Discusses how to select and modify effect programs.
Information on using CompactFlash cards for program storage.
How to monitor signal levels at various points in the audio path.
Configures digital audio input and output protocols and settings.
Methods for organizing and retrieving stored programs.
Assigns frequently used parameters for quick access on the front panel.
Connects parameters to modulation sources like LFOs and envelopes.
Describes single-purpose controllers like PGM+ or Bypass.
Troubleshooting steps for erratic or unresponsive unit behavior.
Steps to prepare a CompactFlash card for software updates.
Details the terms and conditions of the product warranty.