System
Tempo Tuner
Press and hold PROGRAMS and ROUTING
Buttons to enter System Menu.
Turn SELECT Knob to highlight a
menu item; Press to enter.
Press PERFORM Knob
to exit System Menu.
Press and hold PRESETS and PARAMETERS
Buttons to enter Tempo Menu.
Press and hold middle and right
footswitches to open Tuner.
Press PRESETS and PARAMETERS Buttons to
enable Tempo Sync for Programs or Presets.
I/O (Levels): Inputs/Outputs can be set to instrument
or line level. Indicators on rear will light up for Line.
I/O (Exp & Aux): Global settings and calibration for
expression pedals and footswitches.
Set the Tap Tempo BPM, and congure the Tempo
source to Global, Program, or MIDI Clock.
Turn SELECT Knob to highlight menu item; press
again to enter.
MIDI: Congure MIDI settings and CC mappings
that are enabled for all Programs.
12
Global: Change Insert or Dual Routing, DSP or
Relay bypass, and the current Playlist.
Global (Pedal Ctl): Congure control settings that
are enabled for all Programs.
Set tuning frequency, and Mute/Thru. The Tuner is
accessible in every Mode except for Perform Mode.
To Next Page
Loading...
