Chapter 2
Registration, Activation,
and Installation
Eventide uses PACE’s ilok.com licensing system, with or without and iLok hard-
ware dongle, to license our plug-in products. Each license provides two activa-
tions which can reside on either your computer or on an iLok license dongle.
Once you’ve purchased your plug-in, you’ll need to register it on Eventide’s web-
site, activate your license, and install the plug-in on to your computer.
2.1 Registering Your Plug-in
When you purchase an Eventide Native plug-in, you’ll receive a Serial Number
and License Key. The Serial Number will be two letters followed by 6 numbers.
If you have an individual H910 Harmonizer license, the Serial Number will start
with H1 (i.e. H1-######). If you purchased a group license, the Serial
Number will be in the same format, but correspond to that group license (e.g.
AX-###### for Anthology X). The License Key will be 3 sets of 4 characters,
a letter or a number, each; like XXXX-XXXX-XXXX.
Once you’ve received these codes, you can register your plug-in on the Eventide
website. To do so, please log in to http://www.eventideaudio.com, navigate
to My Account in the top right corner, and select Register a New Product.
Then, fill out the form by selecting Native Plug-in (VST, AU, AAX) in the
Product Category field, select H910 Harmonizer or the applicable group license
in the Product list, and enter your Serial Number, License Key, and iLok.com
account name. If you don’t yet have an ilok.com account, you can create one
for free at http://www.ilok.com. Once you’ve done so, press Register.
Once you’ve entered this information and pressed the Register button, Eventide
will send the applicable plug-in license to your ilok.com account, which you will
need to activate to your computer or iLok dongle.
3
To Next Page
Loading...
