Eventide MicroPitch Delay - User Manual

MicroPitch Delay Quick Reference Guide
Pitch A
Pitch of A Channel (left)
from 0 to 50 cents
Pitch Mix
Mix
Dry/Wet Mix
Preset LED Ladder
Rate/Sens
Depth
ACTIVE/BYPASS
Preset Mode: Load Preset
ACTIVE Button/LED
LED lit when ACTIVE
Press to toggle action of
ACTIVE Footswitch
LATCHING< >MOMENTARY
TAP Button/LED
LED OFF = Preset Select Mode
LED ON = Tap Time in Seconds
LED Blinks = Tap Tempo in BPM
Press to toggle Tap Time/Tempo
Press & Hold to Save Preset
TAP/Preset
Press & Hold to toggle between
Preset Select and Tap Modes
Button/LED
Toggles Primary/Secondary
Parameter Control
LED ON = Secondary
LED OFF = Primary
Pitch B
Pitch of B Channel (right)
from 0 to -50 cents
Amount/Intensity of
Pitch modulation
from the LFO or ENV
LFO Mod Rate: 0.1-10Hz
Env Follower Sens: 0-100
Mix of Pitches A&B
Mono Out: Center 50/50
Stereo Out: Center A left, B right

Summary

MicroPitch Delay Front Panel Controls

Pitch A and Pitch B Knobs

Controls the pitch shift for the left (A) and right (B) channels in cents.

Mix and Depth Knobs

Adjusts the dry/wet mix and the intensity of pitch modulation from LFO or ENV.

Secondary Parameters and Rear Panel

Delay A and Delay B Controls

Sets the delay time for channels A and B in Time or Tempo modes.

Rear Panel Connectivity

Details input/output jacks, EXP port, power, and USB connections for expanded functionality.

Expression Pedal and MIDI Integration

Expression Pedal Setup

Guide to morphing parameters by setting heel-down and toe-down endpoints for an expression pedal.

MIDI Preset Management

System Setup and Global Settings

Entering System Setup

How to access global settings by holding specific buttons during power-up.

MIDI Channel and Clock Settings

Bypass Mode and EXP Pedal Jack

Eventide MicroPitch Delay Specifications

General

Brand	Eventide
Model	MicroPitch Delay
Category	Music Pedal
Language	English