LED OFF Tap OFF
STATUS FUNCTION
Press TAP Footswitch to increment presets
TAP Footswitch Functionality
Press & Hold the TAP Footswitch to toggle between Tap mode and Preset Select mode.
Press the TAP Button/LED to toggle between Tap Time and Tap Tempo as follows:
LED ON
LED Blinks
at BPM
Tap Time
Tap Tempo
Tapping sets Delay A & Delay B in seconds. The maximum amount of
delay in Time Mode is 3 seconds.
Tapping sets Tempo in BPM. Delay A & Delay B are quantized to note
durations. The maximum amount of delay in Tempo Mode is 6
seconds and is a function of the BPM & selected Delay Note Length.
EFFECT
Note: A single tap
will always reset
the LFO phase
MicroPitch Delay Quick Reference Guide for Firmware v1.0+| Eventide Part# 141347 Rev A
Eventide is a registered trademark of Eventide Inc. © 2021 Eventide Inc.
Device Manager Software
Available from Eventide’s website for Mac & PC
- Update Pedal Firmware - Backup/Restore entire device to a file
- Restore Factory Settings - Edit System Settings
- Import/Export Presets - View, edit, and organize Presets
Download: eventideaudio.com/edm
Restore Factory Settings: Boot pressing ACTIVE Footswitch & ACTIVE Button
Software Update: Boot pressing TAP Button & TAP Footswitch
Instructional Videos
eventideaudio.com/MicroPitchDelay
Technical Support
eventideaudio.com/support
Follow us on Social
To Previous Page
Loading...
