Use and Care Guide
Replacement Vent Cap
and Gasket Kit
Installation
1
REMOVE LOUVERS FROM
EXISTING VENT CAP.
2
FIT FOAM GASKET OVER
REMAINING VENT FRAME.
3
JOIN NEW VENT CAP TO
GASKET AND FASTEN
OVER GASKET.
Warranty
WHAT IS COVERED
All merchandise is warranted to be free from defects in workmanship and material for one year from the date of purchase. This includes normal wear and
performance failure on items. The manufacturer will replace or repair at their option.
WHAT IS NOT COVERED
This warranty only covers normal wear and performance failure. It does not cover any malfunction, performance failure, or defect arising from the misuse,
abuse, neglect, or modification of the product. Any damage or malfunction inflicted upon the product by the user or other external sources, or any failure to
comply with the warnings and instructions, is not covered.
For further assistance visit www.HomeDepot.com.
HOMEDEPOT.COM
TOOLS REQUIRED
Screwdriver or 5/16”
Nutdriver
HARDWARE REQUIRED (NOT INCLUDED)
Screws (4)
Item # 596-831
Mo d e l # EZFX H D