11
E5 Throttle fault 1. Release the accelerator.
2. Restart.
3. Replace the accelerator
E4 Brake system malfunction 1. Release the brake.
2. Restart.
3. Replace the brake lever.
E3 Hall is abnormal 1. Check whether the Hall wire plug of the motor is loose.
2. Check whether the motor cable is damaged.
3. Replace the motor.
4. Replace the control board.
E1 Encounter obstacles that
E-scooter can’t get over it
1. Release the accelerator and stop braking.
2. Restart.
3. Replace the brake lever.
4. Replace the accelerator
EO
Wrong in communication 1. Check whether the display control board is well
connected;
2. Replace the display.
3. Replace the control board.
Error Code Failure Description Solutions
TROUBLESHOOTING
To Next Page
Loading...
