11
CALIBRATE YOUR HOVERBOARD
Many problems that surfaces are due to misconfigurations on the gyro
board. Most often they are off balance and in that state your hoverboard
does not know if you’re on a flat surface, going up/downhill or even if you
are standing on it or not.
There are numerous more problems that can be helped with a
re-calibration of your board and we highly recommend everyone that
has a problem with their hoverboard to test calibrating it first, before
you start looking at repair options like changing your motherboard or
the altitude/gyro boards.
Step-by-step guide to calibrating your hoverboard in 10
seconds.
-Make sure your hoverboard is standing on a flat surface and with
both upper LED-indicators in level with each other.
-Press the power button and keep it depressed.
-Your hoverboards front LED-lights will flash fast 5 times before it
starts blinking with a longer interval.
-Release the button and restart your hoverboard.
• The hoverboard is shaking when you mount it or go uphill. This
happens more often if it’s kids who are using the hoverboard, due to
their low weight the gyros have a hard time keeping you in balance if
they are not correctly configured.
• It might beep when you start it but won’t let you take off.
• You have the hoverboard in perfect balance but it still wants to spin
around.
• When you ride the hoverboard straight it draws to the left/right.
Here are some very common problems that can be fixed by recalibrating
your hoverboard.
You’re done calibrating the gyro boards and your hoverboard is now
perfectly leveled. It now knows in what direction you’re riding and what
incline it’s currently going in. The best thing about a calibration problem
is that it’s easy to complete and you can do it wherever you are.
Https://www.LikeSporting.com
To Next Page
Loading...