BLUETOOTH SPEAKER
The EV2 Hoverboard has a powerful built-in wireless speakers so
you can play your music while riding.
1. Ensure your EV2 Hoverboard is turned off. If it is not, please turn it off
first before pairing.
2. Turn on your EV2 and the speakers will announce that it’s waiting for
a Bluetooth connection. This will indicate your EV2 speaker is now in
pairing mode.
3. Place the EV2 and the Bluetooth device to which you would like to
pair it within the operating distance. We recommend keeping the two
devices no further than 3 feet apart during pairing.
4. Ensure Bluetooth is enabled on your phone or music device. Refer to
manufacturer’s instructions for how to enable Bluetooth on your device.
5. Once you have activated Bluetooth on your device, select the option
from the list of available Bluetooth devices.
6. Please note, pairing mode on the EV2 will last for two minutes. If no
devices are paired after two minutes, the EV2 speaker will automatically
return to standby mode.
7. If pairing is unsuccessful, turn off the EV2 first and repair following the
aforementioned steps.
NOTE: Once you have paired the EV2 speaker with a device, the
speaker will remember this device and will pair automatically when the
device’s Bluetooth is activated and in range. You can reconnect a
previously paired device without going through the pairing or PIN
process on up to two devices.
Once the EV2 Bluetooth speaker is paired to your device, you can
stream music wirelessly through it. Select the track you wish to listen to
on your device to listen via the speakers. All volume and track controls
will be made using your music device.
PAIRING THE SPEAKER
LISTENING TO MUSIC
9
Https://www.LikeSporting.com
To Next Page
Loading...