What to do if the lights and motor don't work on my Everdure RBES92?
If the lights and motor aren't working, check your house fuses and reset or replace them if they've blown. Also, ensure the power cord is properly fitted into the outlet and the outlet is switched on.
How to fix insufficient suction on my Everdure RBES92?
If your Everdure Ventilation Hood isn't providing enough suction, it might be too far from the gas top. Try refitting the range hood to the correct distance.
How to fix oil leakage from my Everdure Ventilation Hood?
If you're experiencing oil leakage, it could be due to a loose one-way valve or U-shaped section. Try taking down the one way valve and sealing it with sealant. Alternatively, if the leakage is from the connection of U-shaped section and cover, take the U-shaped section down and seal it.
Why is the light on but the motor isn't working on my Everdure Ventilation Hood?
If the light is on but the motor isn't working, first, make sure the fan switch is in the correct position. If the issue persists, it could be due to a failed fan switch or motor, and you should contact Everdure Service.
How to fix lights not working on Everdure RBES92 Ventilation Hood?
If the lights on your Everdure Ventilation Hood aren't working, the most likely cause is broken or faulty globes. Replace the globes as per the instructions.
What to do if my Everdure RBES92 inclines?
If your range hood is inclining, the fixing screw might not be tight enough. Tighten the hanging screw to make it horizontal.
What to do if the Everdure Ventilation Hood light is on, but the motor doesn't work?
If the light is on but the motor isn't working on your Everdure Ventilation Hood, there are several potential causes. First, the impeller leaf might be blocked; if so, get rid of the blockage. Alternatively, the capacitor could be damaged, requiring replacement by an authorized person. It's also possible that the motor bearing is damaged or jammed, or that there's a bad smell coming from the motor, both of which necessitate motor replacement by an authorized technician.
Why is my Everdure RBES92 Ventilation Hood leaking oil?
Oil leakage from your Everdure Ventilation Hood can occur if the one-way valve and air ventilation entrance aren't tightly sealed; in this case, take down the one way valve and seal with sealant. Another cause could be leakage from the connection of the U-shaped section and cover, which requires taking the U-shaped section down and applying sealant.
Detailed steps for installing Everdure range hoods RBES63, RBES65, RBES91 and RBES96 directly to a wall.
Detailed steps for installing Everdure range hoods RBES64 and RBES92 directly to a wall.
Instructions for operating the RBES92 model with electronic controls, including fan speed and light functions.
Instructions for operating RBES63, RBES64, RBES65, RBES91, RBES96 models using push button controls.
Procedure for replacing light bulbs in Everdure RBES63 and RBES91 range hoods.
Procedure for replacing light bulbs in Everdure RBES64 and RBES92 range hoods.
Procedure for replacing light bulbs in Everdure RBES65 and RBES96 range hoods.
General| Brand | Everdure |
|---|---|
| Model | RBES92 |
| Category | Ventilation Hood |
| Language | English |
To Next Page
