• Chemical label. ALWAYS READ and FOLLOW all chemical label instructions.
• Licensing/regulation. Refer to any applicable licensing restrictions or state/federal regulations
with regard to the application of the particular chemical you plan to use.
• Emergency procedures. Before handling chemicals, carefully review the “Chemical Accident
Procedures” listed later in this section, as well as the “Statement of Practical Treatment” on the
chemical label.
• Inhalation/contact. ALWAYS take precautions to avoid inhaling or coming into contact with
the chemical.
• Personal protective equipment. ALWAYS wear protective clothing, eye protection, and
chemical-resistant gloves when operating and cleaning the pump. Wear additional protective
gear (such as facemask or apron) as recommended on the chemical label.
• Children/pets. Pesticides can be especially toxic to children and animals. ALWAYS exercise
extra caution around children. Keep pump and all spray materials away from children and
animals.
• Ventilation. ALWAYS ensure there is adequate ventilation when mixing, pouring, or spraying.
• Flammables. NEVER use any flammable chemicals in the pump.
• Corrosives. DO NOT use corrosive chemicals in the pump. They can weaken the pump and its
parts, resulting in leaks. Check with the chemical manufacturer to ensure chemical is
compatible with all components of the pump.
• Chemical interaction. ALWAYS flush the pump before switching chemicals. Different
chemicals may interact dangerously with each other.
• Chemical storage. ALWAYS store pesticides in a properly labeled container and in a secure
location per the manufacturer’s recommendations.
• Health monitoring. Monitor the health of operators who are frequently exposed to pesticides,
as recommended by the chemical label or local/federal regulations.