EverFocus EBD430/MV2 - Adjusting Zoom and Focus

CHAPTER 2 INSTALLATION
2.3 Adjusting Zoom and Focus
There are two rings for adjusting focus and zoom.
1. Adjust the outer ring to the right and left to adjust focus
2. Adjust the inner ring to the right and left to zoom in or zoom out.
Note: There is a screw located in the focus ring and the zoom ring for
waterproofing purposes only. These are NOT set screws!! Please don’t
loosen or remove them.
A
djustment Zoom
A
djustment Focus
14