EverFocus EDH5240 User Manual

2 Megapixel Full HDcctv
Indoor IR Dome Camera
Operation Instructions
Model No. EDH5240
Please read this manual first for correct installation and operation. This manual should be retained for future
reference. The information in this manual was current when published. The manufacturer reserves the right
to revise and improve its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio
speakers since the electromagnetic fields generated from these devices may distort the video image.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein.
Improper disassembly or introduction of corrosive materials may result in equipment failure or other
damage.
3. Try and avoid facing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal
circuits.
4. Keep the power cord away from water and other liquids and never touch the power cord with
wet hands.
Touching a wet power cord with hands or touching the power cord with wet hands may result in electric
shock.
5. Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
Do not touch the surface of the sensor directly with the hands. Use a damp soft cloth to remove any
dirt from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor
and the camera lens. Please do not use complex solvents, corrosive or abrasive agents for cleaning.
7. Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera at temperatures within 0 ~ 40 (32 ℉ ~104 ℉ ) and humidity between 20~80%. The
input power source is 12VDC/24VAC.
All manuals and user guides at all-guides.com
all-guides.com

EverFocus EDH5240 Specifications

General

Weatherproof Rating	IP66
Video Compression	H.264 / MJPEG
Sensor Type	CMOS
S/N Ratio	More than 50dB
IR Distance	30m
Power Supply	DC12V / PoE
Effective Pixels	1920 x 1080
Minimum Illumination	0.01 Lux (Color), 0 Lux (IR on)
Day/Night	Yes
Video Output	Network
Operating Temperature	-20°C to 50°C
Dimensions	150mm x 80mm x 80mm

Summary

Safety Precautions

Product Overview

Main Features

Key features and capabilities of the HDcctv dome camera.

Package Contents

List of items included in the camera package for setup.

Specifications

Technical specifications of the EverFocus EDH5240 camera.

Dimensions

Physical dimensions for surface and flush mount installation.

Major Parts and Functions

3-Axis Gimbal Bracket

Camera Installation Guide

Surface Mount Installation

Step-by-step instructions for mounting the camera on a surface.

Flush Mount Installation

Step-by-step instructions for mounting the camera flush in a ceiling.

OSD Menu and Configuration

Exposure Settings

Configure camera exposure parameters like Shutter, AGC, BLC.

White Balance Control

Adjust screen color balance using different modes like Auto, Manual, Indoor.

Day/Night Mode

Set camera operation for color, B/W, or automatic switching based on light.

Special Settings

Configure resolution, camera title, D-Effect, TV standard, and language.

Image Adjustment

Fine-tune image sharpness, brightness, and contrast levels.