Customer Service 1-888-707-1880
or email customerservice@dyaco.ca
9 Dyaco Canada Inc.©2021
STEP 2
1. Release the nuts on the backside of seat (13), attach the seat (13) to sliding tube (12), and
then re-tighten the nuts.
2. Insert the sliding tube (12) into the seat post (10). Secure using a club knob (23) and a flat
washer (22) which are pre-assembled on the seat post (10).
3. Insert the seat post (10) into the main frame (16). Secure using a quick release knob (7).
Note: The seat can be horizontally and vertically adjustable after your cycle is fully
assembled.
To Next Page
Loading...
