Need help?Do you have a question about the Evil Mad Scientist AxiDraw SE/A3 and is the answer not in the manual?
General| Model | AxiDraw SE/A3 |
|---|---|
| Manufacturer | Evil Mad Scientist Laboratories |
| Category | Robotics |
| Maximum Media Size | A3 |
| Control Interface | USB |
| Compatibility | Windows, macOS, Linux |
| Software | Inkscape with AxiDraw extension |
| Repeatability (typical) | 0.1 mm |
| Maximum Pen Up/Down Speed | 100 mm/s |
| Motor Type | Stepper motor |
| Type | Plotter |
| Working Area | A3 (297 x 420 mm) |
| Drive System | Belt drive |
| Maximum Speed | 15 cm/s |
Guidelines for safely lifting, operating, and moving the AxiDraw.
Steps to connect the AxiDraw to power and the computer via USB.
How to initiate a plot using the Plot tab in AxiDraw Control.
How to control active plotting jobs using the pause button and software.
Strategies for plotting documents with distinct layers or colors.
Specifying the AxiDraw model for correct software operation.
Resolving issues with accessing the full plotting range of the machine.
Diagnosing and resolving issues related to carriage position control.
Information on obtaining assistance for repairs or replacement parts.
To Next Page