Need help?Do you have a question about the Evinrude E-TEC 300 and is the answer not in the manual?
General| Displacement | 3.4 L |
|---|---|
| Alternator Output | 133 Amps Total / 50 Net Dedicated |
| Fuel Induction | E-TEC Direct Injection with stratified low RPM combustion mode |
| Lubrication | Multi-point targeted oiling |
| Starting | Electric |
| Steering | Remote |
| Trim Method | Power Trim and Tilt |
| Horsepower | 300 HP |
| Fuel System | E-TEC Direct Injection |
| Recommended Fuel | 87 Octane |
| Gear Ratio | 1.85:1 |
| Exhaust | Through prop |
| Engine Type | V6 |
| Shaft Length | 20 in / 25 in / 30 in |
To Next Page
