To Next PageTo Next Page
Need help?Do you have a question about the EVOKO Room Manager and is the answer not in the manual?
General| Operating System | Android |
|---|---|
| Display | 7" capacitive touch screen |
| Resolution | 1024 x 600 |
| Connectivity | Wi-Fi, Ethernet, Bluetooth |
| Power Supply | PoE |
| Mounting | Wall mount |
| Environmental Conditions | Operating temperature: 0°C to 40°C, Humidity: 10% to 90% non-condensing |
Unpack the Evoko CD, run it, and follow the on-screen instructions.
Create room accounts in Microsoft Exchange and launch the Evoko PC application.
Use the PC application to export room settings to a USB stick for transfer.
Mount the device, connect its cables, and then power it on.
Connect the USB stick and assign the correct room to each device.
Use the provided template for standard wall mounting procedures.
Information about the wall mounting bracket and its installation.
Details on the security locking screw used for mounting.
Instructions for routing cables through or along the wall.
Connect the device to the server via network, preferably using PoE.
Use the DC connector for power if PoE is not available.
Connect via USB for device configuration purposes.
