54
APPENDIX A
TECHNICAL SPECIFICATIONS
This section presents your printer’s technical printing properties.
General features
• Single-sided print module, edge-to-edge printing.
• Color sublimation and monochrome thermal transfer.
• Print head: 300 x 600 dpi (monochrome and color printing) or 300 x 1200 dpi (monochrome printing only).
• 16 million colors.
• 32 Mb of RAM – 64 Mb on request.
• Double-sided lamination module (with a duplex module).
Print and lamination speed
Full card print
• CMYK (single-sided printing – single-sided lamination) 188 cards/hour
• CMYK-K (double-sided printing – single-sided lamination) 140 cards/hour
• CMYK-K (double-sided printing – double-sided lamination) 110 cards/hour
Maximum speed (under special conditions).
• ½ YMCK (single-sided printing – single-sided lamination) up to 215 cards/hour (single-sided)
Card management and specifications
• Feeder capacity: 100 cards (0.76 mm – 30 mil).
• Output hopper capacity (rear): 100 cards (0.76 mm – 30 mil).
• Reject hopper/output hopper (front): 100 cards (0.76 mm – 30 mil).
• Card thickness: 0.76 to 1.00 mm (30 to 40 mil), adjustment using the gage.
• Card types: PVC and composite PVC cards, PET, recycled PET cards, ABS
1
and special varnished cards
1
.
• Card format: ISO CR80 – ISO 7810 (53.98 mm x 85.60 mm).
¹ Under specific conditions
To Next Page
Loading...